IGBT controlled Static Voltage Stabilizer
WORKING
Encon QUIKorrect , IGBT based PWM type static voltage stabilizer only the difference voltage is switched through IGBT and will be added or subtracted from the mains. This is done electronically without any step changing in voltage which occurs when the system regulates. This is achieved by a feedback control system using digital signal processor (DSP). The output voltage is sensed by the DSP and corrections are made by varying the duty cycle of the PWM at 20KHZ and correction speed 20000/second.
This stabilizer boosts up the voltage if it is low and bucks the voltage if it is high.
Highlights of QUIKorrect:
* Instantaneous correction speed – over 20000V/second
* Discrete IGBT up to 30KVA 1PH and 90KVA 3PH
Module IGBT up to 70KVA 1PH and 210KVA 3PH
* Single PCB for control stage, IGBT driver section and power stage
* RFI, EMI and Surge Protector inbuilt
* Single contactor for three phase system
* Single LCD for three phases
* RS 485/Bluetooth connectivity
* Output Voltage Regulation – +/- 1%
* Automatic Bypass
* All protections included – low voltage, high voltage, overload, short circuit over temperature, phase reverse and phase fail
Specifications
|
Specification |
||
|
Particulars |
Single Phase |
Three Phase |
|
Capacities Discreet IGBT based IGBT module based |
1KVA to 30KVA 30KVA to 70KVA |
3KVA to 90KVA 90KVA to 200KVA |
|
Control type |
DSP based IGBT PWM switching |
DSP based IGBT PWM switching |
|
Input Voltage Range for 220V output Normal Wide Extended Input Voltage Range for 110V output Normal Wide Extended |
180V to 260V 150V to 290V 90V to 300V 90V to 130V 75V to 145V 45V to 175V |
312V to 450V 260V to 500V 155V to 520V 155V to 225V 130V to 250V 78V to 300V |
|
Output Voltage |
220V +/- 1% settable 110V +/- 1% settable |
380V +/- 1% settable 190V +/- 1% settable |
|
Regulation |
+/- 1% |
+/- 1% |
|
Efficiency |
> 97% |
>97% |
|
Input Frequency |
45Hz to 65Hz |
45Hz to 65Hz |
|
Wave Form |
Same as Input |
Same as Input |
|
Effect of Power factor |
nil |
nil |
|
Display |
LCD for Input voltage Output voltage Load VA Line frequency Overload High voltage input Low voltage input Cut off mode Bypass mode Set up mode Name of your company |
LCD for Input voltage Output voltage Load VA Line frequency Overload High voltage input Low voltage input Cut off mode Bypass mode Set up mode Name of your company |
|
Rate of Correction |
20000V/second |
20000V/second |
|
Operating Temperature |
0 – 50°C |
0 – 50° C |
|
Duty cycle |
Continuous |
Continuous |
|
Nature of Cooling |
Air cooled |
Air cooled |
|
Mains bypass |
Auto bypass to mains when stabilizer is on cut off mode and mains input voltage is between 190V to 250V. |
Auto bypass to mains when stabilizer is on cut off mode and mains input voltage is between 190V to 250V. |
|
Protections |
Overload Short circuit High voltage Low voltage |
Overload Short circuit High voltage Low voltage |
|
Trip and restart |
auto |
auto |
Encon Power Co